CMS-100 Web Logger
Continuous Monitoring System
The CMS-100 System has the capability of connecting up to twenty (20) DHP-485 hydrocarbons sensors. The data transmitted from the sensors is stored both in the logger and on our propriety PetroSense Website. The CMS-100 will display alarms on the web. It also has the capacity to send alarm notices via e-mail, up to five (5) addresses.
APPLICATIONS
- Process water
- Waste water
- Oil field produced water
- Separation vessel effluent
- Storm water run-off
- Bilge and ballast water
- Groundwater remediation monitoring
- Carbon filter bed breakthrough
- Heat exchanger leak detection
FEATURES
- Continuous data collection and recording
- Ethernet and GPRS Connectivity
- Battery Back-up
- Connect up-to 20 DHP hydrocarbon probes
- Real time remote monitoring
- Secure Data Network
- Automatic Firmware Updates Online
- Intrinsically safe probe network*
- Analog (V or mA) output*
*Optional
PERFORMANCE AND HARDWARE SPECIFICATIONS OF THE CMS-100
Below is a snapshot of our Web page displaying the graphics as well as up to 72 hours of the most recent data collected. Selecting the data you want to be displayed can customize the charts. The chart below is displaying the concentration levels in ppm for three DHP-485 hydrocarbon sensors.The new PetroSense CMS-100 Web-based Data Logger provides real time monitoring via the Web.
| CMS-100 WEB LOGGER - HARDWARE SPECIFICATIONS | |
|---|---|
| Enclosure: | NEMA 4 – IP66 |
| Dimensions: | 10.04 / 255 Long - 9.84 / 250 Wide - 6.34 / 161 High |
| Power: | Input=120/240 VAC 50/60 Htz Output=12 VDC, .5A, battery charger |
| Communications: | Proprietary Website - Ethernet or GPRS modem |
| Environmental Temperature: | -20C to +50C |
| Options: | Wireless Data Transfer - Solar Powered System |
| Note: System requires Internet access for retrieving data. | |
